Industry Copper Coated Welding Carbon Graphite Rods 10mm

The carbon electrode for carbon arc gas planning is an electrical Pole used in the carbon arc gas planning. The electrical arc can be produced between electrode and metal objects as electrical Pole and metal objects form electrical loop. The heat produced by electrical arc melt metal and compressed air blow away melt metal residues around the carbon electrode. The technology of using this method to cut metal or make slots on metal or remove redundant metal parts is called carbon arc gas planning.

Applications:
1.Gen-welding .
2.removing,cuntting,and figurating the defect of solder.
3.slotted shape"U"
4.Removal of weld defects.
5.Open groove, in particular, the docking groove.

Specification:

1.Density:≥1.6g/m3

2.Spicific resistance:≤19μΩm

3.Compressive strength:≥36Mpa

4.Flexural strength:≥17Mpa

5.Thermal expansion:≤3.00

6.Ash content:≤0.50%

7.Particle size: 0.2-2.0mm

8.Dimension: Dia.6mm,8mm,10mm  Length 305mm,350mm  OR as your requirments.

Advantages:

stable arc,  less splash

shaped good  appearance

easy for removal of slag layer

easy for striking arc and restiking arc

Indexes of product: